裝載機經常使用到油品主要有發動機機油、發動機柴油、變矩器/變速箱用油(液力傳動油)驅動橋用油、液壓系統使用的液壓油、各鉸接銷使用的潤滑脂，正確選擇和使用這些油品對維持各系統的正常運轉、降低磨損，延長機器使用壽命具有重要的意義。

1、山東裝載機發動機機油較高黏度的機油對運動系的阻力也相對較高，不但耗費功率，增加油耗，而且機油容易氧化，影響冷啟動時的保護。
Shandong loader engine oil viscosity oil for high resistance exercise system is relatively high, not only consume power, increase fuel consumption, and engine oil is easily oxidized, the impact of cold protection startup.

2、山東裝載機發動機柴油一般使用含硫量低于0.5%的柴油，如果含硫量高，將縮短換機油的周期。
Shandong loader diesel engines typically use less than 0.5% sulfur content of diesel fuel, if a high sulfur content, will shorten the oil change cycle.

3、山東裝載機變矩器用油正常工作溫度為82~95℃之間，有時可達120℃左右，因?qū)σ毫鲃佑玫挠推酚刑厥庖螅F(xiàn)無國家標準規定其質量等級及黏度要求，一般裝載機采用的液力傳動油6號液力傳動油、8號液力傳動油。
Shandong loaders torque converter oil normal operating temperatures between 82 ~ 95 ℃, sometimes up to about 120 ℃, because of the oil used in hydraulic transmission with special requirements,are no national standards for its quality grade and viscosity requirements, general loader uses hydraulic transmission hydraulic transmission oil oil on the 6th, the 8th hydraulic transmission oil.

4、山東裝載機驅動橋用油一般采用GB12981□91中規定的HZY3合成制動液，相當于API中規定的SAEl703C油。
Shandong loader drive axle oil commonly used HZY3 synthetic brake fluid specified in GB12981 □ 91, the equivalent of SAEl703C oil specified in API.