隨著濟南裝載機http://www.lcsqtax.cn/產量的提高，以及外觀油漆套色作業的大量使用，整機涂裝線在使用過程中存在哪些問題呢？

1、套色作業使得濟南裝載機外表面的噴漆時間縮短，而屏蔽時間非但沒有縮短，還有加長的趨勢，使得整個流水線的節拍發生了變化，在產量低的時候還影響不大，只不過一些工位增加了等待時間，產量增大后就需要將部分屏蔽工作放在線下進行。
Chromatic paint job so that the outer surface of the loader Jinan time shortened, but the time has not only shorten the shield, as well as lengthen the trend, making the entire pipeline to the beat changed, in low yield when it has little effect, but some stations increasing the waiting time, increases the yield after work needs to be placed under the partially shielding conducted online.

2、由于濟南裝載機整個生產線的節拍縮短，而水跡烘干室有一個升溫的過程，這樣一來溫度剛升到有時甚至還沒有升到規定溫度就需要轉到下一工位，根本就不能發揮作用，而水跡烘干室是通過式的，打開門后溫度立即下降到環境溫度。
Because the entire production line Jinan loaders beat shortening and water stains drying room has a heating process, so that the temperature rise and sometimes just do not need to rise to a predetermined temperature to the next station, simply can not play role, while traces of water by drying room type, the temperature dropped immediately after opening the door to the ambient temperature.

3、濟南裝載機http://www.lcsqtax.cn/烘干室也存在和水跡烘干室一樣的問題，不能充分發揮烘干作用。各室體的大門采用氣動門，開關的時間較長，完全打開或完全關閉約3-5min，在整個節拍較長時還不覺得，在節拍縮短后就顯得有點過長了。
Jinan loaders drying room and there are traces of water drying room the same problem, can not give full play to the drying effect. Each room door body pneumatic doors, switch a long time, fully open or fully closed about 3-5min, the

longer the time do not feel the whole tempo, beat shortening in seemed a bit too long after.