1、凡易造成傷害事故的高卸王裝載機http://www.lcsqtax.cn/運動部件均應封閉或屏蔽，或采取其他避免操作人員接觸的防護措施，以操作人員所站立平面為基準，凡高度在2m以內的各種傳動裝置必須設防護裝置，高度在2m以上的物料輸送裝置和皮帶傳動裝置應設防護裝置。
Where is easy to cause accident high unloading Wang loading machine moving parts shall be closed or shield, or take other avoid operator contact with protective measures, to operating personnel stand plane as a reference, where the

height of less than 2m drive devices must be set protective device, highly in 2M above the material conveying device and a belt driving device protection device should be set up. 

2、高卸王裝載機為避免擠壓傷害，直線運動部件之間或直線運動部件與靜止部件包括墻、柱之間的距離，必須符合有關安全距離的規定，機械設計應保證不該通過的身體部位不能通過。
High discharge King loader to avoid extrusion injury, linear motion between components or linear motion and stationary components including the distance between walls and columns, must comply with the provisions of the relevant safety

distance and mechanical design should be guaranteed by the through parts of the body can not. 

3、高卸王裝載機應根據需要設置可靠的限位裝置，機械設備必須對可能因超負荷發生損害的部件設置超負荷保險裝置。
High unloading King loader should be based on the need to set up a reliable limit device, mechanical equipment must be on the part of the damage due to overload overload insurance device. 

4、高卸王裝載機http://www.lcsqtax.cn/高速旋轉的運動部件應進行必要的靜平衡或動平衡試驗，有慣性沖撞的運動部件必須采取可靠的緩沖措施，防止因慣性而造成的傷害事故。
High discharge King loading high-speed rotation of the moving part of a machine should be carried out the necessary static balance and dynamic balance test, collision inertia of moving parts must take reliable measures to cushion to prevent hurt accidents caused by inertia.